"The Jigs Up" - Soldering Jig for RC Connectors

View Larger Image

Price: $14.99 OUTOF STOCK Item Number: JIGSUP Manufacturer: JIGS UP Manufacturer Part No: JIGSUP Add to a new shopping list Email this page to a friend

Hi folks, We have now posted a short demonstration video using The Jigs Up soldering jig which is used for holding the electrical connectors for soldering tasks.   Description of “The Jigs Up”   The three holes on top of the jig are used to hold 3.5mm up to 5.5 mm bullet connectors.   The “v” slot on the front of the jig is used to hold the 2mm bullet connectors.   The slot on the right side of the jig is used for the Traxxas and the Deans T connectors.   The slot on the left side of the jig is used for Deans 2-pin, 3-pin, and 4-pin micro connectors.     Instructions for “The Jigs Up”   The video clip on the website will show us soldering a Deans T Connector, a 3.5mm bullet connector, and a 2mm bullet connector.   ******To start out: make sure that your soldering iron is HOT!!!!   We recommend that you tin both the wire and the connector pin to be soldered with a liberal amount of solder.   Now place the wire on top of the connector pin and place the “hot” soldering tip on top of the wire until the solder melts…   Then take the soldering tip away from the wire and hold the wire in place for a few seconds until the solder cools……..   This will give you a good connection!