FIGHTING FALCON ARF TIGER

Description:

    The SAPAC Modern Military Jet resembles the famous and very advanced Jet. The SAPAC Modern Military Jet exemplifies the same beautiful lines as the original fighter jet. The wing and body used in our Modern Military are specially designed to allow high G maneuvers, yet keep a very low wing load. The Modern Military Jet is a stable aircraft with excellent performance. Designed with ducted fan(s) with brushless motor(s), the Modern Military Jet has great performance and power. You can fly any aerobatic maneuvers desired and the power system designed for the Modern Military Jet provides the capability to fly it in more than low to moderate wind conditions. The Modern Military Jet is controlled with a 4-channel R/C system with mixing option (needed on some models). On the ground you have control of the steerable nose gear, in the air you have speed, ailerons, elevator and rudder where used. The large capacity and high rate LiPo battery provides exuberant energy and because the ESC features a safeguard, it is impossible to discharge your battery excessively.

Specifications:

• Fuselage Total Length : 40.75inces - 1035mm
• Wingspan : 27.56inches - 700mm
• Main Wing Area : 13.4 sq. dm
• Wing Loading : 57g/sq.dm
• Flying Weight : 27.1 ounces - 768g
• Thrust : 0.9 to 1
• Fan : 5 Blade 70mm Electric Ducted Fan

Recommended specifications for additional items: (Not Included in the ARF version.)

• Transmitter : 4 channels with mixing options (for some models)
• Receiver : Mini 6 channels
• Servo : 8g servo (3 each)
• ESC : 50 Amp
• Motor : Outrunner B2842 3200KV
• Battery : 3 cell 2200 MAH 25C
• Lithium-polymer battery charger

What's in the box?

Aircraft, instructions, landing gear, wheels, decals as supplied, hardware pack and ducted fan(s) and motor(s) if supplied.

What's needed to complete?

• Four Channel Transmitter with mixing options (for some models).
• Compatible receiver.
• B2842 3200KV Motor
• 3 micro 8 gram servos
• 3 cell 2200 MAH 25C Lithium-polymer battery (if not supplied)
• Lithium-Polymer Battery charger
• Instead of using regular glue for construction, we recommend using 12 minute epoxy for maximum strength and durability for high-g maneuvers.
• foam safe adhesive and foam safe accelerator if needed.

Additional Information:

• The Center of Gravity is located 90mm back from the leading edge of the wing.

Aircraft requires minimal assembly: simply glue the wings and control surfaces on, mount the landing gear, install the battery or batteries. Mount the servos and reciever (if not supplied and installed), then simply plug in the connector(s).Fasten the canopy. And the skies the limit!